
H120.
ModelMaker H120 is a class-leading handheld 3D laser scanner delivering extremely detailed and precise high-speed measurement results on almost any material or part.
Ultra-fast high-definition 3D scanning.
The cutting-edge ModelMaker H120 firmly pushes the ever-exacting boundaries of handheld laser scanning. Incorporating blue laser technology, ultra-fast frame rate, specially developed Nikon optics and the ability to measure the most challenging parts this represents the next generation of portable laser scanning. The H120 makes no compromises in addressing the market needs by efficiently delivering the most detailed and accurate data in a fraction of the time of competing technologies – no matter the size or the material.
Key Benefits.
Extremely low noise data thanks to Nikon lens and blue laser technology
Scanner accuracy of 7 microns
Able to measure the most precise details on parts of any size
Measures at over 450 stripes every second on all materials
Full Field-of-View indicator for precise scanning
Real-time optimization of the laser for every single measured point
Designed for use under all shop floor or field conditions
Uncompromising performance.
The ModelMaker H120 guarantees fast data collection over a large area with no compromise on small details – offering great flexibility in a single solution even when cycle time is critical, no matter the type of parts measured.
By combining a frame rate of 450 Hz, a stripe width up to 120 mm and non-interpolated point spacing of 35 μm, users benefit from high productivity and detailed measurements optimised within a single sensor.
The MCAx S arm further enhances the user experience by adding the ability to scan truly cable free, through high-speed Wi-Fi connectivity and battery power with absolutely no reduction in speed, quality or data coverage.
Measure the most challenging materials.
Patented Enhanced Sensor Performance (ESP4) provides automatic real-time adjustment of the laser intensity for every single point in the same image frame ensuring full data regardless of the laser line spanning materials of completely different optical properties.
Measure high contrast reflectivity changes, highly absorptive coatings, near-mirrored finishes and near-transparent materials with no reduction in data rate, even when scanning wirelessly.
Intelligent reflection control further refines measurements of very shiny or polished materials by filtering out unwanted reflections.
Low noise data and very fine details.
Expertly crafted bespoke in-house lens design enables the smallest structural resolution and lowest noise measurements in handheld scanning.
The specially developed Nikon optics and hand-assembled low-speckle blue laser source technology provide incredible details such as surface texture, very sharp edges and even dust, scratches and abrasions.
Nikon does not use interpolation techniques to increase data rates. Every point is an optically measured point.
Increased feature measurement precision.
The incredible dynamic range, pin sharp optics of the ModelMaker H120 and the flexibility of movement and accuracy of the MCAx S arm combine to provide measurements of parts other solutions cannot deliver.
Geometric feature measurements are more exact than ever due to the clarity of data on thin-walled parts such as sheet metal, giving much more statistical information for truly repeatable feature fitting or trim edge extraction than can be achieved using tactile CMM technology.
This allows precise form inspection, reaching a level of detail far beyond traditional position, size and orientation.
Start measuring immediately.
System set-up requires no special network settings, boots-up within seconds and eliminates warm-up thanks to scanner thermal compensation. Paired with the structural rigidity, thermal stability and absolute encoder technology of the MCAx S arms, users can switch on and start confidently collecting accurate data straightaway.
ModelMaker H120 | |
Points per stripe | Up to 2000 (non-interpolated) |
Frame rate | Up to 450 Hz |
Point resolution | Up to 35 μm |
Stripe width | Up to 120 mm |
Measurement depth | Up to 100 mm |
Accuracy (1 sigma) | 7 μm |
Measuring laser | Blue, Class 2 |
Full FoV indicator laser | Red, Class 2 |
Temperature compensation | Yes (no warm up) |
Laser power adjustment | ESP4 real-time per point |